ACER SH03B DRIVER DETAILS:
|File Size:||14.1 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other|
|Price:||Free* (*Free Registration Required)|
ACER SH03B DRIVER
The locations and meanings of the LEDs are indicated below. Acer SH03B below are the location and use of each LED as well as what the setting switch is used for.
Подборка популярных товаров №980 на tarzan-movie.ru
This label is only on Ver 2. Lights to indicate that the current operation is the configuration mode and goes off to indicate that the current operation is the protected mode. Lights to indicate an AS-i power fail. Initialize operation, mode shifting, AS-i power fail Normal operation When setting switch is in DISP position Configuration Acer SH03B No display Protected mode The lowest slave address among those which encountered a configuration mismatch is displayed. The LES of each connected salve unit is displayed at 1-second intervals.
Each slave unit that has encountered a configuration mismatch is displayed at 1-second intervals in an LPS-LES mismatch list. Nothing is displayed if there is no mismatched slave unit. No other input is acceptable until all salve addresses are displayed.
Ph&co PC Depot. Wired Earphone
The LES of each of all connected slaves are Each slave unit which has encountered a displayed at about 1-second intervals. Note Nothing is displayed if there is Acer SH03B mismatched slave unit.
SET The operation modes are switched. Note Keeping pressing the switch will not change the modes.
Keep your hand off the switch for at least 1 second to make it off. Keeping pressing the switch for at least 5 Keeping Acer SH03B the switch for at least 5 seconds causes the current slave configuration seconds selects the configuration mode. Note 1 Keeping pressing the switch for not longer than 5 seconds selects the protected mode but does not cause the configuration to be registered or enables automatic addressing. Note 1 NOTE If a slave unit with address "0" is connected, no configuration registration is made and the protected mode is not selected. Alarm "E5" is displayed. In the protected mode, selecting DISP causes the slave address encountering a configuration mismatch to be displayed. The possible causes include a slave unit failure, broken AS-i cable, and noise-induced AS-i communication error. Normal operation is resumed when the AS-i power returns to normal.
|Sony Vaio VPCS132FXZI||Follow me on Twitter|
|Acer Aspire 5710 VGA||User Reviews|
|AVerMedia A328 AnalogDTMB||Ademco 6270 Graphic Touch Screen Keypad K0392V4|
|Asrock 880GM-LE Realtek HD Audio||Usage Statistics for tropic.ssec.wisc.edu|
If the alarm occurs again, replace the converter unit. Replace the converter unit. In the configuration Acer SH03B, nothing is displayed. How the DO behaves at the watchdog alarm is determined according to the slave unit type and parameter setting used. See the relevant slave unit specification. So, register it again according to the following chart. Turn off power Place switch in SET position, and turn on power again. This operation may take 5 seconds or more. Take your hand off switch, and turn power off and on again to restart system. If 7-segment LEDs do not display "E1", registered configuration has been repaired.
ビルの隙間 空の隙間 心の隙間 - Photo sharing "PhotoZou"
Keep switch in SET position until "E1" disappears. Acer SH03B operation takes 5 seconds or more. If 7-segment LEDs still display "E1", replace converter unit.
Note that if "E1" is displayed, the CNC may fail to start up. The converter having this function is Acer SH03B shipped in or after June Those shipped before do not support this function. Connect AS-i cable. Configuration mode?
Newest products, latest trends and bestselling items、OVEVO SH03B NFC Bluetooth Celicious Vivid Acer Aspire E Invisible Screen Protector [Pack of 2]. Acer SH03B to Low · Created on · Picture of ACER E EARPHONE (TRUE HARMONY) RM Details · Picture of OVEVO SH03B SPORT BT EARPHONE.