ASROCK H61M-PS EXTREME TUNING DRIVER DETAILS:
|File Size:||5.2 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other|
|Price:||Free* (*Free Registration Required)|
ASROCK H61M-PS EXTREME TUNING DRIVER
Drivers and utilities for motherboards ASRock:
Sometimes coolers are designed for their own custom fan, and your fan is not the typical square frame style. Unless you can compare the mounting holes with another 92mm fan to check, buying another might be a waste. Plus how do you know if another fan won't work the same way? Asrock H61M-PS Extreme Tuning done all the right things, given your last post. Disengaging the lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees. Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.
Insert the Pin CPU: Hold the CPU by the edge where is marked with black line. Locate Pin1 and the two orientation key notches. For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 4.
|A4Tech SWW-19||To search drivers or utilities, select the motherboard model:|
|Asus Eee PC VX6 CapsHook||Description|
|Asus Eee PC 1005HA Chipset||Damaged or outdated Motherboard drivers|
|Sony Vaio VPCSB4DFXB WebCam Companion 4||ASRock H61M-DGS Socket 1155 Micro ATX Motherboard|
Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the Asrock H61M-PS Extreme Tuning and the heatsink to improve heat dissipation.
How to make CPU fan slower on ASRock H61M/U3S3 H61?
Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink.
Below is an example to illustrate the installation of the heatsink for Pin CPU. Apply thermal interface material onto center of IHS on the socket surface. Place the heatsink onto the socket.
Drivers for ASRock H61M-PS Motherboard
Step 3. Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps Asrock H61M-PS Extreme Tuning thumb to install and lock. Repeat with remaining fasteners. If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard.
Step 5. Connect fan header with the CPU fan Asrock H61M-PS Extreme Tuning on the motherboard. ASRock > H61M-PS. *Intel® Rapid Start Technology and Smart Connect Technology are only supported under Windows® 7 OS or later versions. **The highest supported DRAM frequency depends on the CPU you've installed.
Quick Installation Guide, Support CD, I/O Shield. - 2 x SATA Data Cables (Optional).
Intel® H61 Chipset. Unique Feature - ASRock Extreme Tuning Utility (AXTU).