ASROCK P45DE3 SATA RAID DRIVER DETAILS:
|File Size:||25.4 MB|
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* (*Free Registration Required)|
ASROCK P45DE3 SATA RAID DRIVER
Unplug the power cord from the wall socket before touching any components.
To avoid damaging the motherboard s components due to static electricity, NEVER Asrock P45DE3 SATA RAID your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components. Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Asrock P45DE3 SATA RAID placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply.
Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Step 1. Open the socket: Step Disengage the left lever by pressing it down and sliding it out of the hook.
ASROCK P45DE3 Installation Manual Page 22
Disengage the right lever by pressing it down and sliding it out of the hook. Keep the right lever positioned at about 90 degrees in order to flip up the load plate. Asrock P45DE3 SATA RAID 2. Insert the Pin CPU: Hold the CPU by the edge with the triangle mark pin 1 on your upper right corner.
Pin1 16 17 Step Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion.
ASRock P45XE-WIFIN, LGA775 Socket, Intel Motherboard
Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Close the socket: Flip the load plate onto the IHS, then the cover will automatically come off Asrock P45DE3 SATA RAID itself. The cover must be placed if returning the motherboard for after service.
Press down the right load lever, and secure it with Asrock P45DE3 SATA RAID load plate tab under the retention tab. Press down the left load lever, and secure it with the load plate tab Asrock P45DE3 SATA RAID the retention tab. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPU.
ASRock P45DE motherboard for PC Gaming by ASRock
Apply thermal interface material onto center of IHS on the socket surface. Step 4. Place the heatsink onto the socket. Align screws with the motherboard s holes. Use a screw driver to install the screws. If Asrock P45DE3 SATA RAID don t fasten the screws, the heatsink cannot be secured on the motherboard.
Asrock p45de3 Manual De Usuario - Página 1 def 60
Step 5. Step 6. Connect fan header with the CPU fan connector on the motherboard.
Secure excess cable with tie-wrap to ensure the cable does not interfere with fan operation or contact other components. If three memory modules are installed, then Triple Channel Memory Technology is activated. Unlock a DIMM slot by pressing the retaining clips outward. The DIMM only fits in one correct orientation. PCI slots: PCIE slots: Therefore, both these two slots Asrock P45DE3 SATA RAID work at x16 bandwidth.
- ASRock [Archive] - Page 7 - TweakTown Forums
- Free driver Asrock B75 Pro 3 MagOne
- Компьютер - Каталог : Материнские платы ASRock
- Help me setup Raid on ASrock Z77 Extreme4 please
- Navigazione articoli
Thank you for purchasing ASRock P45DE3 motherboard, a reliable If the SATA / SATAII HDDs are NOT set for RAID configuration, it is. P45DE3. Compatible with FSB //// MHz CPUs; Supports Dual Channel DDR3 ; Supports OC DNA, EuP 2 x SATA Data g: RAID.