We’re living in the world full of new technologies and it is necessary to have a sharp mind. The drivers from our collection are where it’s at for you.



Type: Driver
File Name: d_link_10757.zip
File Size: 26.0 MB
26 (4.88)
Downloads: 15
Supported systems: Windows All
Price: Free* (*Free Registration Required)

Download Now

D-Link VOIP TERMINAL ADAPTER DVG-2001S user manual

This lets the VoIP Terminal Adapter reduce the bandwidth that a call uses by not transmitting silent Packets when you are not speaking. The Rx Gain db level may be set in 0.


Used to raise or lower the gain volume of signals that go out to the IP from the line-side or trunk-side interface. The Tx Gain db level may be set in 0. Click the Apply button to activate the new D-Link DVG-2001S VoIP Adapter. The System User Name remains admin, this cannot be changed using the web manager interface. Be sure to save the new setting.

New Century Technologies Inc - Printing and Office Products and computers - Search Result

Administrator Password User Password admin is the Administrator login name. Enter the password here and the same password in the Confirm Password field. This will be the password that the administrator will use to gain access to the configuration menu of the device. The default password is admin. This will be the password that the users will use to D-Link DVG-2001S VoIP Adapter access to the configuration menu of D-Link DVG-2001S VoIP Adapter device. Users will have limited privileges on this device. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks.

This feature enables you to perform Administrator tasks from the remote Internet host. The default port number for web management is 21 L. Make sure the firmware you want to use is on the local hard drive of the computer. Please check the D-Link Support site for firmware updates at You can download firmware upgrades to your hard drive from the D-Link D-Link DVG-2001S VoIP Adapter site. Firmware Update File Name Click on the link in this screen to find out if there is an updated firmware; if so, download the new firmware to your hard drive.

Enter the firmware file name and DOS path in this field. Click Backup to initiate the backing up of a configuration file. Click Upload to initiate the uploading of the configuration file once you have located it by 21 24 O.


Click the Reboot 22 25 P. If it is rebooted, the logs are automatically cleared. You may save the log files under Log Settings. The screen above displays the Traffic Statistics.

  • Gateway VoIP D-Link Dvg-6008s 8x FXO Rj-11 4x LAN 1x Wan SIP
  • D-Link DVG-2001S Quick User Manual
  • Back To Business Guide

The traffic counter will reset if the device is rebooted or can be reset by clicking the Reset button. To refresh current statistics, click the Refresh button. To view a specific section, click on its hyperlinked name. A new window of information will appear. Power Supply DC 12V, 1.

Asus U24E Intel ManagementHow to configure VoIP equipment?
Asus VW246HAsk a Question
Daewoo DTQ-15U5SCGUpdate Location
HP EliteBook 840 G1 AMD GraphicsBrand Post
Planex GW-DS11CD-Link DVG-2001S overview

Frequently Asked Questions Why can t I access the web based configuration? The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility, however. To resolve difficulties accessing a web utility, please follow the steps below. Step 1 Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid D-Link DVG-2001S VoIP Adapter light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. What type of cable should I be using? The following connections require a Crossover Cable: If there is a link light, the cable is right.


The wiring in crossover and straight-through cables are different. The two types of cable have different purposes for different LAN configurations. How to tell straight-through cable from a crossover cable: The main way to tell the difference between the two cable types is to compare the wiring order on the ends of the cable. If the wiring is the same on both sides, it is straight-through cable. Box Fon ata makes telephoning over the Internet as easy as you'd like it to be: It combines the industry's latest Voice over IP network technology with advanced communication features, and is D-Link DVG-2001S VoIP Adapter with any phone service.

There is no need to use a separate VoIP-telephone.

The D-Link DVGS VoIP Terminal Adapter links traditional telephony networks to IP networks with conventional telephony devices such as analog phones. It's best to use the same computer that is connected to your router for configuring the. DVGS VoIP Terminal Adapter. The DVGS acts as a DHCP.

Related Drivers