MELLANOX MCX353A-TCAT ADAPTER CARD WINDOWS 7 DRIVER

Expansion ROM partition not found Loss Mellanox MCX353A-TCAT Adapter Card connection to BMC upon firmware upgrade Running rmmod may cause unexpected behavior Upgrading from firmware v may cause loss of connection to BMC. A link flapping issue Alignment marker arrival can no longer drop the link.

Cleared errors during PCIe link retraining Fixed the flow to issue software reset, after the driver was stopped Access to closed resources PCIe speed change Occasionally, a failure occurred in speed when changing to Gen2 InfiniBand loopback InfiniBand loopback was blocked during link negotiation on the same port Voltage scaling Fixed process voltage scaling issue Cable reading issue Fixed a rare cable reading issue upon cable insertion Upon failure, the following message is received: Payload inaccessible - cannot continue Fixed the flow to issue software reset, after the driver was stopped.

InfiniBand loopback InfiniBand loopback was blocked during link negotiation on the same port Voltage scaling Fixed process voltage scaling issue Momentarily packet drop on one port while the other port goes down Activated by the INI active by default. Changes and Major New Features in Rev 2. Mellanox Techologies Mellanox MCX353A-TCAT Adapter Card tools might leave the flash semaphore locked if the tool operation is forced stopped. The locked semaphore prevents the firmware from Mellanox MCX353A-TCAT Adapter Card the flash and causes firmware hang.

Computer Components & Parts

PCIe correctable errors in speed change Bloom filter Bloom filter is currently not supported. Mellanox Techologies 19 Rev 2.

You are trying to override configurable FW by non-configurable FW. Please refer to "Memo: Downgrade to previous GA requires server reboot. Downgrading from to any previous version requires server reboot. FDR speed degradation with 0.

MFT locking of flash semaphore MFT tools might leave the flash semaphore locked if the tool operation is forced stopped. The locked semaphore prevents the firmware from accessing the flash and causes firmware hang. Clear the semaphore using MFT command: Bloom filter Bloom filter is currently not supported. You are trying to Mellanox MCX353A-TCAT Adapter Card configurable FW by non-configurable FW. If you continue, old FW configurations will be cleared, do you want to continue? ConnectX®-3 VPI Single and Dual QSFP+ Port. Adapter Card User Manual.

P/N: MCXA-FCBT, MCXA-TCBT. All rights reserved. Mellanox®, Mellanox logo®, BridgeX®, ConnectX®, CORE-Direct®, InfiniBridge®, InfiniHost®, InfiniScale®, PhyX®.

Finding the GUID/ MAC and Serial Number on the Adapter Card. .

Download Mellanox Network Card drivers - Sorted by operating system - Page 9

Figure Mechanical Drawing of the Single-port MCXA-[QFT]CBT Adapter Card. . MCXA-TCAT.