MELLANOX MHES14-XTC HCA CARD DRIVER DETAILS:
|File Size:||25.2 MB|
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* (*Free Registration Required)|
MELLANOX MHES14-XTC HCA CARD DRIVER
There were a couple of other considerations: The first possibility was the 8-port AOC-SAT2-MV8 card which Mellanox MHES14-XTC HCA Card a good Solaris driver and is well regarded, but the problem with it, from my perspective, is that it uses the PCI-X interface to the motherboard and this is only available on a small number of server motherboards and PCI-X seems be old technology now. This was a Mellanox MHES14-XTC HCA Card but not optimal, and so not my first choice. The other great advantage of this card is that it uses a much more modern, faster and commonly found PCIe interface PCI Expressand it can auto-negotiate the operating speed according to the slot it finds itself in.
Luckily I had a spare PCIe Mellanox MHES14-XTC HCA Card slot free so this was the card for me. You need to get some special cables for it too, like these. After reading of other Solaris users having success with this card I bought one and it seems to be working well now.
After reading a few articles like this excellent one from AnandTech: Very cool, as you will see later! The firmware currently is at level 1.
I believe the version 1. Actually I had run out of 3. It looks Mellanox MHES14-XTC HCA Card bit silly, but it does the job. Must find long-term solution to this later… Preparing for migration of existing root pool I had previously installed my OpenSolaris So it had to be done the hard way — always the way! Changed results in Beta tests that were Refer to Comments to Fail, added note about these tests in the Result Summery.
Computer Components – Computer Accessories – Notebook Cases – Video Cards
Added special naming note. Result Key The following table contains possible results and their meanings: The Mellanox MHES14-XTC HCA Card was observed to exhibit conformant behavior however an additional explanation of the situation is included, such as due to time limitations only a portion of the testing was performed.
The DUT was observed to exhibit non-conformant behavior. The DUT was observed to exhibit behavior that is not recommended. Results are for informative purposes only and are not judged on a pass or fail basis.
Mellanox InfiniHost III Lx MHES14-XTC - Network Adapter
From the observations, a valid pass or fail could not be determined. An additional explanation of the situation is included.
The DUT does not support the technology required to perform this test. Due to testing station limitations or time limitations, the tests could not be performed.
Аудіо, відео, побутова, офісна, комп'ютерна техніка - ціни :
The observed values of the specified parameters are valid at one extreme and invalid at the other. Not tested due to the time constraints of the test period. The IB fabric configuration utilized for any tests requiring a Mellanox MHES14-XTC HCA Card configuration is shown below.
- Get Mellanox Electronic Parts Online
- Hardware, Memory, and Operating System Compatibility for Intel®
- Side Refine Panel
The model name for this device is different than that reported by the HCA. Link status was observed visually via status lights on the device. Port width and link speed was verified via ibdiagnet. This version of the test plan does not explicitly demand a link to be at the proper speed, the next version will.
Logo testing in the 2 nd Mellanox MHES14-XTC HCA Card of will require proper link speed between all link combinations. Link Partner Device Host: IB Fabric Initialization Test 1: Only one SM is run at a time. InfiniHost III Lx HCA cards deliver the most cost effective 10 or 20Gb/s solution The MHES14 card can be directly inserted into.
PCI Express x4 or wider slots. ports the Mellanox HCA Adapter Cards listed in Table 1.
MHESXTC / MHESXSC InfiniHost III Lx PCI Express x8 MemFree HCA Adapter Card. 1. Possible boot failure off. Debug FW on some.
MHESXTC Rev A2 cards.