We’re living in the world full of new technologies and it is necessary to have a sharp mind. The drivers from our collection are where it’s at for you.

HP 2000-239WM SYSTEM DIAGNOSTICS UEFI DRIVERS FOR WINDOWS 7

HP 2000-239WM SYSTEM DIAGNOSTICS UEFI DRIVER DETAILS:

Type: Driver
File Name: hp_2000_30473.zip
File Size: 125.9 KB
Rating:
3.44
16 (3.44)
Downloads: 15
Supported systems: Windows All
Price: Free* (*Free Registration Required)

Download Now
HP 2000-239WM SYSTEM DIAGNOSTICS UEFI DRIVER



The Extensive Test takes 2 or more hours to complete, depending on the system configuration. You can cancel at any time by HP 2000-239WM System Diagnostics UEFI the Escape key Esc. Use the following steps to run the Extensive Test. From the main menu, click System Tests, then click Extensive Test. Click Run once, or Loop until error. While the test is running, the time remaining and test result for each component displays on the screen. The test can take 2 or more hours to complete. The information is also available in Test Logs on the main menu.

If the System Test did not detect a hardware problem, continue with the Component Tests section. Running Component Tests The component tests are used to manually select and test the individual computer components. If this app is not on your computer, download the latest version from the HP Hardware Diagnostics website. On the main menu, click Component Tests. Click the plus sign next to each component to expand the selection. Your Component Tests menu might be different, depending on the components installed on your computer. Hold the power button for at least HP 2000-239WM System Diagnostics UEFI seconds to turn off the computer. Turn on the computer and immediately press Esc repeatedly, about once every second.

When the menu appears, press the F2 key. The Component Tests menu displays. Complete list of Component Tests Select a component Test and follow the on-screen instructions. Processor Test - Quick 10 second test to make sure all the processors are functioning properly. Click Processor, then click Run once. Memory Tests - There are three different memory tests available. Start with the Fast Test three minutes or more depending on the amount of system memory. If the Fast Test does not find a problem, run the Quick Test about 10 minutes. This test is currently not available in the Windows version of the hardware diagnostics. If the Quick Test does not find a problem, run the Extensive Test. It can run once or loop until an error occurs.

To run the tests, follow the steps in Memory Test. To run the hard drive tests, follow the steps in Hard Drive Tests.

Power Source Test - This test checks that both the battery and the AC adapter are functioning properly. To run the test, click Run once. The Power Source test time is 4 minutes. Battery Calibration time is 2 to 4 hours.

HP 2000-239WM SYSTEM DIAGNOSTICS UEFI WINDOWS VISTA DRIVER

This test requires a good battery. HP 2000-239WM System Diagnostics UEFI recommends verifying that your computer can receive power by connecting a known working AC adapter. The test takes 2 minutes to run. Battery Test - The Battery Test checks the battery and allows you to run calibration if needed. The Battery Check test time is 2 minutes.

Assembly RTC Bios Cmos Battery for HP Omen and 21 similar items

To run the test and for battery information, follow the steps in Battery Test. During the test, a few music notes are played in sequence and then repeated. This test takes one minute to complete. To run the test, click Audio, and then click Run once. Choose either the speakers or the headphones.

HP System Diagnostics UEFI Drivers Download

When asked, enter the number of notes you heard. Bluetooth Module Test - This test checks that the Bluetooth module is properly detected and enabled for use. To run the test, click Bluetooth Module, and then click Run once. Fingerprint Reader Test - This interactive test checks the fingerprint reader.

HP System Diagnostics UEFI Drivers - spexe Download - DriversGuru

During the test, you are prompted to swipe a finger over the fingerprint reader. To run the test, click Fingerprint Reader, and then click Run once. HP PC Hardware Diagnostics Windows is a Windows-based utility that allows HP 2000-239WM System Diagnostics UEFI added Remote HP PC Hardware Diagnostics UEFI can be configured to  Missing: WM.

Hey there! @Ash28, Thanks for stopping by the HP Support Forums! I understand when you power on your PC you are getting a black screen  Missing: ‎WM.

HP 2000-239WM SYSTEM DIAGNOSTICS UEFI TREIBER WINDOWS 8

Related Drivers