We’re living in the world full of new technologies and it is necessary to have a sharp mind. The drivers from our collection are where it’s at for you.

ONSET HOBO UX100-014 DATA LOGGER DRIVER DOWNLOAD (2019)

ONSET HOBO UX100-014 DATA LOGGER DRIVER DETAILS:

Type: Driver
File Name: onset_hobo_11256.zip
File Size: 8.6 MB
Rating:
4.2
25 (4.2)
Downloads: 17
Supported systems: Windows All
Price: Free* (*Free Registration Required)

Download Now
ONSET HOBO UX100-014 DATA LOGGER DRIVER



The logger also has an internal 10K thermistor for cold-junction compensation of the thermocouple output. The thermocouple channel has a bit resolution while the internal 10K thermistor has bit resolution. Using HOBOware, you can easily configure the logger alarm to trip for specific Onset HOBO UX100-014 Data Logger or low temperatures. Or, you can set up burst logging in which the logger records data at a different interval during certain conditions. The logger can also calculate minimum, maximum, average, and standard deviation statistics. This compact data logger has a built-in LCD screen to monitor temperature, logging status, battery use, and memory consumption in between readouts.

HOBO UX100 Type J, K, T, E, R, S, B, N Thermocouple - UX100-014M

Press this button for 3 seconds to start or stop logging data, or to resume logging on the next even logging interval. This requires configuring the logger Onset HOBO UX100-014 Data Logger HOBOware with a push button start or stop, and with Resume logging on next button push selected see Setting up the Logger. Remove the battery tray on the top of the logger to access the logger battery see Battery Information. Use this button to clear a tripped alarm see Setting up Alarms or to switch between statistics, alarm readings, and the current temperature reading.

HOBO UX100-014M Type J, K, T, E, R, S, B, N Thermocouple Data Logger

Internal 10K Thermistor Temperature: The internal 10K thermistor not visible in the diagram measures ambient temperature, if the channel is configured to log in HOBOware see Setting up the Logger. Use the two mounting loops to mount the logger with the hook-and-loop strap see Mounting the Logger.

ONSET HOBO UX100-014 DATA LOGGER WINDOWS 7 DRIVER

This logger is equipped with an LCD screen that displays details about the current status. This example shows all symbols illuminated on the LCD Onset HOBO UX100-014 Data Logger followed by definitions of each symbol in the table below. If you also launched the logger with a push button start, this symbol will not appear on the display for 30 seconds.

The battery indicator shows the approximate battery power remaining. The logger has been configured to stop logging when memory fills. The memory bar indicates the approximate space remaining in the logger to record data. When first launched, all five segments in the bar will be empty. In this example, Onset HOBO UX100-014 Data Logger logger memory is almost full only one segment in the memory bar is empty. The logger has been configured to never stop logging wrapping.

The logger will continue recording data indefinitely, with newest data overwriting the oldest data. When first launched, all five segments in the memory bar will be empty. In this example, the memory is full all five segments are filled in and new data is now overwriting the oldest data.

Hobo data logger temperature humidity in new zealand

This will continue until the logger is stopped or the battery runs out. The logger is currently logging. A sensor reading is above or below the high or low alarm that you configured. This symbol at left will clear depending on how alarms were configured in HOBOware.

Acer WALKMAN NWZ-E053Description
BenQ NA140CDQuick Order

If the alarm was configured to clear when the logger is relaunched, this symbol will remain on the LCD. An alarm is ready to be cleared. These symbols show the maximum, minimum, average, and standard deviation values most recently calculated for Onset HOBO UX100-014 Data Logger logger if the logging LCD Symbol Description mode has been set to Statistics in HOBOware.

ONSET HOBO UX100-014 DATA LOGGER DRIVER FREE

This is the sensor reading that tripped the alarm. This is an example of a temperature reading. Temperature units are determined by the settings in HOBOware. The display will count down in days, hours, minutes, and seconds until logging begins. The HOBO UXM Single Channel Thermocouple data logger records temperature in indoor environments with thermocouple sensors.

The HOBO UX Series is Onset's next-generation family of data loggers for HOBO Type J, K, T, E, R, S, B, N Thermocouple Data Logger - UXM.

Related Drivers